View cart “Surelock Samples-Sand” has been added to your cart.
Urethane - GraniSeal - 2 Gal Kit
Recommended when a thin/medium build clear coat is desired over a color flake or quartz broadcast system. Quick dry time. Excellent chemical resistance, hardness, abrasion resistance, and UV stability.
Two part, fast-setting, industrial
strength, poly hybrid sealer.
Graniseal will not yellow. VOC
Compliant. Recommended for outdoors and areas with good ventilation.
Add to Wishlist
Add to Wishlist
We know these are
hard to find, and even harder to wait for right now. Take
advantage of our inventory while it lasts!
$18,129 +
Shipping/Taxes
MultiQuip LD6SL
Hydrostatic PowerTrowel
6' Trowel, Gasoline
powered, Sprayer and Lights, Comes with set of EZ
Movers
The MQ
Whiteman LD6 and LD6SL are the only fully hydrostatic 6-foot
ride-on trowels in the market today.
Incorporating a proportional servo controlled pump and
high torque drive motors, the LD6 can achieve performance
levels unmatched in the industry by any 6-foot ride-on trowel.
Add to Wishlist
Add to Wishlist
Sealer - Acrylic Diamond Cure and Seal (Diamond Shield 50) - 5 Gal - A
styrene co-polymer in a solvent based sealer 50% solids acrylic sealer
is used on newly stamped or poured concrete. A cure and seal product
that provides moisture retention for a proper hydration for strength gain.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
P.F. Joint Fill is a 2-component, 100%
solids, 100% reactive epoxy that has been formulated to fill joints or
saw cuts and remain flexible even after cure. Joint Fill meets ASTM
specification C920, type M, grade P that has approximately 85%
elongation and meets all USDA guidelines for use in federal inspected facilities.
Add to cart
Add to Wishlist
Add to Wishlist
The Concrete
Protector’s Quick Fix is a
two-component polymer. It comes in a two gallon kit and is used to
fix small holes, pits, and interior hairline cracking with fast
drying time.
Add to cart
Add to Wishlist
Add to Wishlist
Perfect Poly 90 is a two component
sealer with excellent adhesion, scratch resistance, and UV
resistance. It has been designed for use in areas where VOC limits
(Volatile Organic Compounds) are a concern. (Including California)
Slower pot life and decreased odor compared to other polyaspartic
sealers makes this the ultimate top coat for your project.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Janitorial - High Noon Floor Finish Wax
Add to cart
Add to Wishlist
Add to Wishlist
Ameripolish®
DNS-400 is a sprayable
acrylic sealer that is fast-drying and long-lasting to protect
and beautify concrete finishes. DNS-400 contains complex
additives and acrylics not found in any other sealers to provide
outstanding UV protection, along with fungicides to prevent
mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to cart Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to Wishlist
Add to Wishlist
Sealer - Barricade 50 Acrylic Sealer - 5 Gal - A concentrated
sealer for The Concrete Protector EXTERIOR cementitious texture systems.
UV resistant gloss finish. This is a versatile 50% solids concentrated
pure acrylic sealer that must be diluted first with solvent depending on
state VOC laws: DMC (Dimethyl Carbonate) or Xylene. Typically diluted
1:1 with solvent to reduce the concentrate down to a 25% solids pure
acrylic sealer. You may also dilute 2 parts solvent to 1 part
concentrate (16.5% solids) and install 3 thin layers (depositing 50%
solids on the surface).
Add to cart
Add to Wishlist
Add to Wishlist
Sealer - Anti-Gloss Additive - Qt - 1 Qt. for 5 Gal. for Satin Finish or
2 Qts. to 5 Gal. for Matte Finish. For Acrylic sealers.
Add to cart
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (48)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (38)
- Sealers & Topcoats (23)
- Stains & Dyes (71)
- Tools & Supplies (112)
- Warrior Equipment (14)
- Contractor Pricing Available
- Experts Available To Chat