0
0 items
$0.00
No products in the cart.
Aggregate to add to any seal coat to make a non-skid surface.
Add to Wishlist
Add to Wishlist
Sealer - Acrylic Diamond Cure and Seal (Diamond Shield 50) - 5 Gal - A
styrene co-polymer in a solvent based sealer 50% solids acrylic sealer
is used on newly stamped or poured concrete. A cure and seal product
that provides moisture retention for a proper hydration for strength gain.
Add to cart
Add to Wishlist
Add to Wishlist
Sani-Tred - Rubber Granules
Add to cart - 50 lb bag
Add to Wishlist
Add to Wishlist
Phosphorescent Flakes offers an exciting look and addition to
any decorative epoxy, polyaspartic or urethane floor coating
system. Phosphorescent
Flakes are phosphorescent
and actually glow in the dark with a Blue or Green color hours
after the room or area goes dark. Activated with both outdoor
and indoor illumination.
Add to cart 10 pounds per unit.
Add to Wishlist
Add to Wishlist
NeverPump Battery
operated Bak-Pak sprayer. No need to recharge while on the job
site, up to ten hours (600 minutes) of spray time means enough
power to completely drain the 4 gallon tank several times over
with no down time or hassle to recharge the battery.
Add to Wishlist
Add to Wishlist
Janitorial - High Noon Floor Finish Wax
Add to cart
Add to Wishlist
Add to Wishlist
Sample set of all 16 Elastastone colors
Add to cart
Add to Wishlist
Add to Wishlist
Ameripolish®
DNS-400 is a sprayable
acrylic sealer that is fast-drying and long-lasting to protect
and beautify concrete finishes. DNS-400 contains complex
additives and acrylics not found in any other sealers to provide
outstanding UV protection, along with fungicides to prevent
mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to cart Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to Wishlist
Add to Wishlist
Sealer - Barricade 50 Acrylic Sealer - 5 Gal - A concentrated
sealer for The Concrete Protector EXTERIOR cementitious texture systems.
UV resistant gloss finish. This is a versatile 50% solids concentrated
pure acrylic sealer that must be diluted first with solvent depending on
state VOC laws: DMC (Dimethyl Carbonate) or Xylene. Typically diluted
1:1 with solvent to reduce the concentrate down to a 25% solids pure
acrylic sealer. You may also dilute 2 parts solvent to 1 part
concentrate (16.5% solids) and install 3 thin layers (depositing 50%
solids on the surface).
Add to cart
Add to Wishlist
Add to Wishlist
Sealer - Anti-Gloss Additive - Qt - 1 Qt. for 5 Gal. for Satin Finish or
2 Qts. to 5 Gal. for Matte Finish. For Acrylic sealers.
Add to cart
Add to Wishlist
Add to Wishlist
A “ready-to-go” single component, 25%
solids pure acrylic sealer. Use as a sealer for The Concrete Protector
EXTERIOR cementitious texture systems. UV resistant gloss finish. Use
2 coats of this 25 % solids sealer.
Add to cart
Add to Wishlist
Add to Wishlist
Fumed
silica can be used for specific properties such as dispersion,
stability, hydrophobicity, and functionality. Along with the
traditional polyester, silicone, adhesives, paints and coatings
applications, fumed silica is used with increasing success in
high technology fields.
Add to cart
Add to Wishlist
Add to Wishlist
Coverage 75 to
100 sq ft per gal, Container Style Pail, Application Covers
Approximately 1500 Square Feet, Creates High Gloss Finish, Use As Seal
Coat, For Use With Clean Concrete, Steel, Wood, Color Clear
Add to cart
Add to Wishlist
Add to Wishlist
PolyureaSeal 100 is a 100% solids, high elongation,
VOC free, polyurea sealant, used in horizontal saw-cut &
preformed joints. It is used on concrete and asphalt in high
traffic areas, food processing, cold storage, chemical plants,
parking structures, shipping & transportation, poultry &
meat plants, which are just a few of the recommended applications.
Add to cart
Add to Wishlist
Add to Wishlist
Speeds
curing, allowing FlexKRETE to set up as quickly as 5 minutes in
moderate weather and allows FlexKrete to be used in temperatures
below 0° (F).
Add to cart
Add to Wishlist
Add to Wishlist
Included
with every FlexKRETE 102 order, as it's required to allow
FlexKRETE to cure. Additional FK Catalyst can be purchased as needed.
Add to cart
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (48)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (38)
- Sealers & Topcoats (23)
- Stains & Dyes (71)
- Tools & Supplies (112)
- Warrior Equipment (14)
- Contractor Pricing Available
- Experts Available To Chat