0
0 items
$0.00
No products in the cart.
While
the Mohs' Hardness test was developed originally for
testing minerals, the same concept can be applied
to industrial materials. Use this kit for "scratch
testing" substances to determine their Hardness according
to the Mohs' Hardness scale, which ranges from 1 to 10,
where Diamond is the hardest at 10, while Talc is softest at 1.
Add to cart
Add to Wishlist
Add to Wishlist
•Exclusive squeegee system assures high performance at low cost
•High quality/ high performance vacuum motor
•Great maneuverability due to optimum weight distribution
•Squeegee blade can be used on 4 sides before replacement
•Easy access to internal components
•Designed to assure minimum noise levels
•Battery level indicator
•On board charger and external battery charger plug • Inlet and outlet filters for maximum tank protection
•Squeegee assembly and blade replacement without tools
Financing Assistance
Demo Request
Add to cart •High quality/ high performance vacuum motor
•Great maneuverability due to optimum weight distribution
•Squeegee blade can be used on 4 sides before replacement
•Easy access to internal components
•Designed to assure minimum noise levels
•Battery level indicator
•On board charger and external battery charger plug • Inlet and outlet filters for maximum tank protection
•Squeegee assembly and blade replacement without tools
Financing Assistance
Demo Request
Add to Wishlist
Add to Wishlist
The Warrior Ride-On Scrubber WES-2820 offers a high performance scrubber designed to operate at minimal noise levels. The optimal weight distribution and Constant Weight System allows the Warrior Ride-On Scrubber WES-2820 to have high maneuverability and ensure maximum scrubbing results.
Add to cart
Add to Wishlist
Add to Wishlist
The Warrior Ride-On Scrubber WES-3437 offers a high performance scrubber capable of a cleaning speed of 59,200 square feet per hour, while designed to operate at minimal noise levels. The optimal weight distribution and Constant Weight System allows the Warrior Ride-On Scrubber WES-3437 to have high maneuverability and ensure maximum scrubbing results.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
The removable
Rapid RH® Easy Reader with
our patented Touch-n-Sense™ technology allows you to take repeated
readings from any Smart Sensor quickly and easily.
Add to cart
Add to Wishlist
Add to Wishlist
Rapid RH 4.0 EX
concrete moisture tests equilibrate faster than other concrete
moisture tests. The reading taken one hour after installation for
concrete relative humidity content will be within 3% of the final reading.
Add to cart
Add to Wishlist
Add to Wishlist
P.F. Joint Fill is a 2-component, 100%
solids, 100% reactive epoxy that has been formulated to fill joints or
saw cuts and remain flexible even after cure. Joint Fill meets ASTM
specification C920, type M, grade P that has approximately 85%
elongation and meets all USDA guidelines for use in federal inspected facilities.
Add to cart
Add to Wishlist
Add to Wishlist
The Concrete
Protector’s Quick Fix is a
two-component polymer. It comes in a two gallon kit and is used to
fix small holes, pits, and interior hairline cracking with fast
drying time.
Add to cart
Add to Wishlist
Add to Wishlist
NeverPump Battery
operated Bak-Pak sprayer. No need to recharge while on the job
site, up to ten hours (600 minutes) of spray time means enough
power to completely drain the 4 gallon tank several times over
with no down time or hassle to recharge the battery.
Add to Wishlist
Add to Wishlist
Pulse Bac - Dust Grabber - set screw for 7"
Add to cart
Add to Wishlist
Add to Wishlist
The dust grabber replacement seal kit
includes two polymer seals with one worm clamp. Just place the polymer
seal over the steel dust skirt and tighten it using the worm clamp.
Add to cart Designed for Hum-B stand up grinder.
Add to Wishlist
Add to Wishlist
Pulse Bac Dust Grabber
Add to cart
Add to Wishlist
Add to Wishlist
The 7′′ Original Dust Grabber features a durable metal body, long lasting polymer seals and is backed by a lifetime warranty. This shroud uses a grinder specific aluminum adapter that fits your specific brand, ensuring a secure and tight fit and are available for most major brand of 7" angle grinders.
Add to Wishlist
Add to Wishlist
The 7" Original Dust Grabber
features a durable metal body, long lasting polymer seals and is
backed by a lifetime warranty. This shroud uses a grinder
specific aluminum adapter that fits your specific brand, ensuring
a secure and tight fit and are available for most major brand of
7" angle grinders.
For Hum-B stand up grinder.
Add to Wishlist
Add to Wishlist
A minimum of 5,000 views within
the location of your business.
- Use the power of viral video to market your coatings business
- Our viral videos have been seen online tens of millions of times and generated thousands of leads
- Let us use our video marketing abilities for your business
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (48)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (38)
- Sealers & Topcoats (23)
- Stains & Dyes (71)
- Tools & Supplies (112)
- Warrior Equipment (14)
- Contractor Pricing Available
- Experts Available To Chat