Urethane - GraniSeal - 2 Gal Kit
Recommended when a thin/medium build clear coat is desired over a color flake or quartz broadcast system. Quick dry time. Excellent chemical resistance, hardness, abrasion resistance, and UV stability.
Two part, fast-setting, industrial
strength, poly hybrid sealer.
Graniseal will not yellow. VOC
Compliant. Recommended for outdoors and areas with good ventilation.
Add to Wishlist
Add to Wishlist
Aggregate to add to any seal coat to make a non-skid surface.
Add to Wishlist
Add to Wishlist
SCP Hydropolish Concentrate prevents liquids from penetrating the slab
and provides superior stain resistance.
Add to cart
Add to Wishlist
Add to Wishlist
Sealer - Acrylic Diamond Cure and Seal (Diamond Shield 50) - 5 Gal - A
styrene co-polymer in a solvent based sealer 50% solids acrylic sealer
is used on newly stamped or poured concrete. A cure and seal product
that provides moisture retention for a proper hydration for strength gain.
Add to cart
Add to Wishlist
Add to Wishlist
The Hover Scrubber is great for a nice
even cleaning of concrete. Triples the square footage as wand
washing, cleans an area
20” wide with two spinning nozzles, tough flexible bristles protect work
surface and controls over-spray. Splash-free skirt keeps you dry
while you clean.
Add to cart Features:
- 25
lbs
- 20"
- Attaches to any power washer with
a pressure hose
Add to Wishlist
Add to Wishlist
Sani-Tred - Rubber Granules
Add to cart - 50 lb bag
Add to Wishlist
Add to Wishlist
SCP - Maintain 16 Gallon Concentrate. Concentrated - Makes 16 Gal. Will
increase surface abrasion resistance, and the durability of the polished
concrete floor. To be used during the grinding process to lift
slurry.
Add to cart Maintain 8 Gallon
Concentrate. ..Mix 4oz Per 1 Gallon of Water.
Add to Wishlist
Add to Wishlist
Phosphorescent Flakes offers an exciting look and addition to
any decorative epoxy, polyaspartic or urethane floor coating
system. Phosphorescent
Flakes are phosphorescent
and actually glow in the dark with a Blue or Green color hours
after the room or area goes dark. Activated with both outdoor
and indoor illumination.
Add to cart 10 pounds per unit.
Add to Wishlist
Add to Wishlist
P.F. Joint Fill is a 2-component, 100%
solids, 100% reactive epoxy that has been formulated to fill joints or
saw cuts and remain flexible even after cure. Joint Fill meets ASTM
specification C920, type M, grade P that has approximately 85%
elongation and meets all USDA guidelines for use in federal inspected facilities.
Add to cart
Add to Wishlist
Add to Wishlist
The Concrete
Protector’s Quick Fix is a
two-component polymer. It comes in a two gallon kit and is used to
fix small holes, pits, and interior hairline cracking with fast
drying time.
Add to cart
Add to Wishlist
Add to Wishlist
Perfect Poly 90 is a two component
sealer with excellent adhesion, scratch resistance, and UV
resistance. It has been designed for use in areas where VOC limits
(Volatile Organic Compounds) are a concern. (Including California)
Slower pot life and decreased odor compared to other polyaspartic
sealers makes this the ultimate top coat for your project.
Add to Wishlist
Add to Wishlist
Brush replacement made easy with the hover
scrubber brush replacement. Tough flexible bristles protect work
surface and controls over-spray keeping you dry as you clean.
Add to cart
Add to Wishlist
Add to Wishlist
Janitorial - High Noon Floor Finish Wax
Add to cart
Add to Wishlist
Add to Wishlist
Sample set of all 16 Elastastone colors
Add to cart
Add to Wishlist
Add to Wishlist
Ameripolish®
DNS-400 is a sprayable
acrylic sealer that is fast-drying and long-lasting to protect
and beautify concrete finishes. DNS-400 contains complex
additives and acrylics not found in any other sealers to provide
outstanding UV protection, along with fungicides to prevent
mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to cart Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to Wishlist
Add to Wishlist
Brush replacement made easy with the hover scrubber brush replacement.
Tough flexible bristles protect work
surface and controls over-spray keeping you dry as you clean.
Add to cart
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (48)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (38)
- Sealers & Topcoats (23)
- Stains & Dyes (71)
- Tools & Supplies (112)
- Warrior Equipment (14)
- Contractor Pricing Available
- Experts Available To Chat