0
0 items
$0.00
No products in the cart.
The broomcorn whisk w/ ball cap hanger on
the end is a perfect tool for those hard to reach areas.
Add to cart
Add to Wishlist
Add to Wishlist
Blue polyethylene woven, all weather,
multipurpose, 8x8 weave per square inch, polypropolene rope in hem.
Aluminum grommets in corners and every three feet along and each side.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Sealer - Acrylic Diamond Cure and Seal (Diamond Shield 50) - 5 Gal - A
styrene co-polymer in a solvent based sealer 50% solids acrylic sealer
is used on newly stamped or poured concrete. A cure and seal product
that provides moisture retention for a proper hydration for strength gain.
Add to cart
Add to Wishlist
Add to Wishlist
This
portable propane torch kit is your “right hand tool” suggested
for every basement waterproofing project! The torch is the best
way to dry the concrete it requires a standard 20-30 lb propane
tank to be ready to go! Perfect for artificially drying wet
concrete surfaces before priming. This portable torch kit comes
with a flow valve and turbo blast trigger for maximum flame and
temperatures over 3000°F! Includes nozzle assembly, metal
handle, hard rubber grip, and 6 ft. 6” hose. A weed burning
torch is an important ‘quality control tool’ to ensure poured
concrete, cement block, brick and stone/mortar surfaces are bone
dry before application.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
P.F. Joint Fill is a 2-component, 100%
solids, 100% reactive epoxy that has been formulated to fill joints or
saw cuts and remain flexible even after cure. Joint Fill meets ASTM
specification C920, type M, grade P that has approximately 85%
elongation and meets all USDA guidelines for use in federal inspected facilities.
Add to cart
Add to Wishlist
Add to Wishlist
The Concrete
Protector’s Quick Fix is a
two-component polymer. It comes in a two gallon kit and is used to
fix small holes, pits, and interior hairline cracking with fast
drying time.
Add to cart
Add to Wishlist
Add to Wishlist
NeverPump Battery
operated Bak-Pak sprayer. No need to recharge while on the job
site, up to ten hours (600 minutes) of spray time means enough
power to completely drain the 4 gallon tank several times over
with no down time or hassle to recharge the battery.
Add to Wishlist
Add to Wishlist
Janitorial - High Noon Floor Finish Wax
Add to cart
Add to Wishlist
Add to Wishlist
Ameripolish®
DNS-400 is a sprayable
acrylic sealer that is fast-drying and long-lasting to protect
and beautify concrete finishes. DNS-400 contains complex
additives and acrylics not found in any other sealers to provide
outstanding UV protection, along with fungicides to prevent
mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to cart Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to Wishlist
Add to Wishlist
Sealer - Barricade 50 Acrylic Sealer - 5 Gal - A concentrated
sealer for The Concrete Protector EXTERIOR cementitious texture systems.
UV resistant gloss finish. This is a versatile 50% solids concentrated
pure acrylic sealer that must be diluted first with solvent depending on
state VOC laws: DMC (Dimethyl Carbonate) or Xylene. Typically diluted
1:1 with solvent to reduce the concentrate down to a 25% solids pure
acrylic sealer. You may also dilute 2 parts solvent to 1 part
concentrate (16.5% solids) and install 3 thin layers (depositing 50%
solids on the surface).
Add to cart
Add to Wishlist
Add to Wishlist
Sealer - Anti-Gloss Additive - Qt - 1 Qt. for 5 Gal. for Satin Finish or
2 Qts. to 5 Gal. for Matte Finish. For Acrylic sealers.
Add to cart
Add to Wishlist
Add to Wishlist
A “ready-to-go” single component, 25%
solids pure acrylic sealer. Use as a sealer for The Concrete Protector
EXTERIOR cementitious texture systems. UV resistant gloss finish. Use
2 coats of this 25 % solids sealer.
Add to cart
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (48)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (38)
- Sealers & Topcoats (23)
- Stains & Dyes (71)
- Tools & Supplies (112)
- Warrior Equipment (14)
- Contractor Pricing Available
- Experts Available To Chat