SLV P90 2 gal Topcoat Kit

The Concrete Protector's SLV Perfect Poly 90 is a slow setting, low viscosity, low odor 90% solids polyaspartic polyurea topcoat designed for use where VOC limits are a concern. Recommended as a topcoat over epoxy, concrete, plywood, and Graniflex Broadcast Systems. Clear finish with excellent tensile strength and a flexible cure that holds up in demanding floor coating environments.

Key Benefits:

• 90% solids, low VOC formula (less than 4.5 g/L)
• Slow setting for extended working time
• Excellent tensile strength at 4,500 psi
• Concrete failure adhesion rating
• 40% ultimate elongation for flexibility
• 70 Shore D hardness

Recommended Surfaces:

• Epoxy coated concrete
• Bare concrete
• Plywood
• Graniflex Broadcast Systems

Cure Schedule (at 70°F):

• Pot Life: 45-60 minutes
• Tack Free: 2-4 hours
• Recoat/Topcoat: 2-18 hours
• Light Foot Traffic: 5-7 hours
• Full Cure: 24 hours

Physical Properties:

• Coverage: 175-250 sq. ft. per gallon
• Tensile Strength: 4,500 psi
• Hardness: 70 Shore D
• Ultimate Elongation: 40%
• Viscosity: 600 cps
• VOC: Less than 4.5 g/L
• Mix Ratio: 1:1 (Part A to Part B)
• Standard Color: Clear
• Packaging: 2 Gal Kit
• Shelf Life: 1 year in unopened containers

Limitations:

• Floor will be slippery until dry
• Surfaces may be slippery when wet
• Do not apply when substrate temperature is below 50°F or above 85°F
• Must perform a moisture vapor transmission test prior to application
• Clear coating may turn opaque or cloudy due to moisture, especially on exterior surfaces
• Not intended for use on rubber, cork, wood, or bamboo flooring
• Do not thin the product
• Apply in thin coats only

How to Use:

1. Combine equal parts, 1 Part A to 1 Part B.
2. Stir constantly for 1-3 minutes using a stir stick.
3. Apply to surface using a 3/8" nap roller or magic trowel.

Product Documentation

• Technical Data Sheet for SLV P90
• Safety Data Sheet for SLV P90 - Part A
• Safety Data Sheet for SLV P90 - Part B