Wholesale pricing available — Apply online

The Concrete Protector Store  |  SKU: DM-3905

Stamp Mix Single Component

A one-component overlay system for resurfacing and stamping worn concrete flatwork. Just add water, mix, and apply — no additional additives or components. Trowel it smooth or stamp it for texture and pattern work on driveways, walkways, and parking decks that need a new surface without full replacement.

Read more
Regular price $54.83
Shipping calculated at checkout.

Have questions about this product? Call our experts at (877) 743-9732.

Product Description

A one-component overlay system for resurfacing and stamping worn concrete flatwork. Just add water, mix, and apply — no additional additives or components. Trowel it smooth or stamp it for texture and pattern work on driveways, walkways, and parking decks that need a new surface without full replacement.

Bonds to all clean concrete surfaces and cures to a rock-hard finish at 5,200 psi compressive strength. At 3/8" to 1/4" application thickness, it's substantial enough to hide surface damage while still being workable enough to stamp before it sets.

Cure Schedule (75°):

  • Pot life / tack free / recoat: 1 to 5 hours
  • Full cure: 28 days
  • Dry time: approximately 8 hours per 1/4" of thickness

Physical Properties:

  • Compressive strength: 5,200 psi
  • Flexural strength: 2,450 psi
  • Tensile strength: 920 psi
  • Hardness: Shore D 60
  • Abrasion resistance: 140.0 mg (ASTM D-4060)

Mix Ratio: 5 quarts of water per 50 lb. bag

Coverage:

  • 10 to 15 sq. ft. per bag at 3/8"
  • 20 to 25 sq. ft. per bag at 1/4"

Film Thickness: 1/4" to 3/8"

Packaging: 50 lb. bag — white

Limitations: Do not install below 55°F or above 85°F. Do not apply over working cracks, pour joints, control joints, expansion joints, or cold joints. May reflect working cracks in the substrate. Keep from freezing during storage and initial cure.

Product Documentation