High Noon Floor Finish

The Concrete Protector's High Noon Floor Finish is a 20% solids acrylic floor finish that provides high gloss and good durability on resilient and hard surface floors where burnishing is applicable. Built with tough all-acrylic polymers, it burnishes to a rich, deep gloss and extends recoat and strip-out cycles to reduce labor costs over time. Meets ASTM D-2047 slip resistance requirements. Sold in a 1 gallon container.

Key Benefits:

• Burnishes to a rich, deep gloss finish
• Ultra-durable formula extends recoat and strip-out cycles
• Reduces labor costs over time
• Built with tough all-acrylic polymers
• Meets ASTM D-2047 slip resistance requirements
• High coverage rate of 1,500-3,000 sq. ft. per gallon

Cure Schedule (at 75°F):

• Tack Free: 30-60 minutes
• Recoat: 30-60 minutes
• Light Foot Traffic: 30-60 minutes
• Full Cure: 24 hours

Physical Properties:

• Coverage: 1,500-3,000 sq. ft. per gallon
• Tensile Strength: 4,000 +/- 200 psi (ASTM D-412)
• Slip Resistance: 0.5 minimum (ASTM D-2047)
• Viscosity: 2,900 +/- 500 cps
• Solids Content: 20%
• Standard Color: White
• Packaging: 1 gallon
• Shelf Life: 2 years in unopened containers

Limitations:

• Floor will be slippery until dry
• Not intended for use on rubber, cork, wood, or bamboo flooring
• Temperature, humidity, and ventilation may affect dry time

How to Use:

1. Apply to floor using a clean mop.
2. Apply additional coats until desired gloss is obtained.
3. Allow 30-45 minutes drying time between coats.
4. Allow finish to cure for 24 hours before burnishing.

Product Documentation

• Technical Data Sheet for High Noon Floor Finish