Wholesale pricing available — Apply online

The Concrete Protector Store  |  SKU: UT-4513

SLV P90 2 gal Topcoat Kit

The Concrete Protector's SLV Perfect Poly 90 is a slow setting, low viscosity, low odor 90% solids polyaspartic polyurea topcoat designed for use where VOC limits are a concern. Recommended as a topcoat over epoxy, concrete, plywood, and Graniflex Broadcast Systems. Clear finish with excellent tensile strength and a flexible cure that holds up in demanding floor coating environments.

Read more
Regular price $386.92
Shipping calculated at checkout.

Have questions about this product? Call our experts at (877) 743-9732.

Product Description

The Concrete Protector's SLV Perfect Poly 90 is a slow setting, low viscosity, low odor 90% solids polyaspartic polyurea topcoat designed for use where VOC limits are a concern. Recommended as a topcoat over epoxy, concrete, plywood, and Graniflex Broadcast Systems. Clear finish with excellent tensile strength and a flexible cure that holds up in demanding floor coating environments.

Key Benefits:

  • 90% solids, low VOC formula (less than 4.5 g/L)
  • Slow setting for extended working time
  • Excellent tensile strength at 4,500 psi
  • Concrete failure adhesion rating
  • 40% ultimate elongation for flexibility
  • 70 Shore D hardness

Recommended Surfaces:

  • Epoxy coated concrete
  • Bare concrete
  • Plywood
  • Graniflex Broadcast Systems

Cure Schedule (at 70°F):

  • Pot Life: 45-60 minutes
  • Tack Free: 2-4 hours
  • Recoat/Topcoat: 2-18 hours
  • Light Foot Traffic: 5-7 hours
  • Full Cure: 24 hours

Physical Properties:

  • Coverage: 175-250 sq. ft. per gallon
  • Tensile Strength: 4,500 psi
  • Hardness: 70 Shore D
  • Ultimate Elongation: 40%
  • Viscosity: 600 cps
  • VOC: Less than 4.5 g/L
  • Mix Ratio: 1:1 (Part A to Part B)
  • Standard Color: Clear
  • Packaging: 2 Gal Kit
  • Shelf Life: 1 year in unopened containers

Limitations:

  • Floor will be slippery until dry
  • Surfaces may be slippery when wet
  • Do not apply when substrate temperature is below 50°F or above 85°F
  • Must perform a moisture vapor transmission test prior to application
  • Clear coating may turn opaque or cloudy due to moisture, especially on exterior surfaces
  • Not intended for use on rubber, cork, wood, or bamboo flooring
  • Do not thin the product
  • Apply in thin coats only

How to Use:

  1. Combine equal parts, 1 Part A to 1 Part B.
  2. Stir constantly for 1-3 minutes using a stir stick.
  3. Apply to surface using a 3/8" nap roller or magic trowel.

Product Documentation