Ameripolish Penetrating Agent - 30oz (Special Order)

The Concrete Protector's Ameripolish Penetrating Agent is a performance additive used in conjunction with Ameripolish solvent-based dyes to extend drying time and allow deeper dye penetration into concrete surfaces. Mixed at 4 oz per gallon of dye, it minimizes surface residue, reduces material waste, and is especially effective on very dense or hard concrete where normal dye will not penetrate. Applied by spray and microfiber mop in 1-2 light, even coats using a low-pressure airless sprayer. Compatible with most cementitious surfaces.

SPECIAL ORDER: Allow 7-10 business days for shipping on special order items.

Key Benefits:

• Improves dye penetration on dense or hard concrete
• Extends drying time of Ameripolish solvent-based dyes
• Minimizes surface residue and reduces wasted material
• Easy-to-use tilt-and-measure bottle
• Low-VOC compliant formula (0 g/L)
• Compatible with most cementitious surfaces

Recommended Surfaces:

• Interior polished concrete
• Dense, hard-troweled concrete
• Most cementitious surfaces where normal dye will not penetrate

Physical Properties:

• Coverage: 400-600 sq. ft. per gallon
• Mix Ratio: 4 oz Penetrating Agent to 1 gallon of Ameripolish solvent-based dye
• Application: Spray and microfiber mop
• VOC: Compliant (0 g/L)
• Packaging: 32 oz bottle
• Shelf Life: Indefinite

Limitations:

• For use only with Ameripolish solvent-based dyes
• Surfaces must be clean and dry before application
• New slabs must cure for 28 days before application
• Do not apply if concrete is frozen, dirty, or has standing water

How to Use:

1. Combine 4 oz of Penetrating Agent with 1 gallon of Ameripolish solvent-based dye and mix thoroughly
2. Apply 1-2 light, even coats with a low-pressure airless sprayer (dye is being sprayed too heavily if puddles are present)

Product Documentation

• Technical Data Sheet for Ameripolish Penetrating Agent
• Safety Data Sheet for Ameripolish Penetrating Agent