Ameripolish Surelock Dye Sample (Special Order)

A sample size of Ameripolish Surelock concrete dye, ideal for testing color on your specific concrete surface before committing to a full order. Same professional formula as the full-size product, featuring UV stabilizers for fade resistance and a built-in penetrating agent for rich, vibrant color on diamond-polished concrete surfaces. Liquid concentrate eliminates the 3-hour wait required by other dye products. Available in a wide range of colors. Special order item.

(Allow 7-10 business days for shipping on Special order items.) 

Key Benefits:

• Sample size for color testing before a full order
• Consistent, rich penetrating color with UV stabilizers for fade resistance
• Liquid concentrate eliminates the 3-hour dissolving wait of other products
• Mixes with water or ColorSolve for easy on-site preparation
• VOC compliant at 38 g/L
• Indefinite shelf life in unopened containers
• Available in a wide range of colors

Available Colors: Black, Burnt Sienna, Caramel, Chestnut, Chocolate, Eggplant, Forest Green, Gold, Gray, Green, JCP Street, Mahogany, Maroon, Midnight Black, Patriot Blue, Pine Green, Raw Sienna, Red, Saddle Brown, Sand, Sepia, Slate Blue, Terra Cotta, Turquoise, Walnut

Physical Properties:

• Coverage: 400 sq. ft. per gallon
• Mix Ratio: 1 part Surelock to 1 part ColorSolve or 1 part water
• VOC: Compliant (38 g/L)
• Full Cure: 7 days
• Application: Spray and microfiber mop
• Packaging: Sample size (Special Order)
• Shelf Life: Indefinite

Limitations:

• For indoor use only
• New concrete must cure at least 28 days before application
• Apply at ambient temperatures between 40-100°F (4-38°C)
• Keep from freezing
• Do not mix with other chemicals

How to Use:

1. Grind up to 200 grit resin bond diamonds (or 100 grit if skipping the 200 grit step)
2. Remove all dust and debris and allow surfaces to dry if wet cleaned
3. Vacuum surface thoroughly
4. Spray Surelock dye to slightly wet surface without puddles in a consistent, overlapping circular motion, holding the wand 12-18" above the surface
5. Allow surface to dry
6. Remove dye residue with an auto scrubber fitted with a white pad and water
7. Apply Ameripolish 3D HS densifier and allow to dry
8. Polish up to 400 grit resin bond diamonds
9. Apply Surelock dye again for maximum color using the same method
10. Allow to dry and remove residue
11. Polish with 800 grit resins and 1,500 or 3,000 grit if desired

Product Documentation

• Technical Data Sheet for Ameripolis Surelock
• Safety Data Sheet for Ameripolis Surelock
• Safety Data Sheet for Ameripolis Surelock Dye