Protector Quick Fix Kit

The Concrete Protector's Quick Fix is a two-component polymer concrete repair product designed to fill small holes, surface pits, and hairline cracks in concrete floors. When paired with The Concrete Protector's Decorative Texture Mix, this rapid-setting formula can be applied, ground smooth, and ready for coating in as little as 15 minutes. Sets in as little as 10 minutes with a high strength, rigid finish. Apply in thicknesses from 2 in. down to a feather finish for versatile repair work on a wide range of concrete surfaces.

Key Benefits:

• Sets in as little as 10 minutes for fast project turnaround
• Apply from 2 in. thick down to a feather finish
• High tensile strength at 4,300 psi
• Excellent adhesion and abrasion resistance
• Low VOC formula at 6 grams per liter
• Use for cracks, holes, spalled concrete, pop-outs, broken steps, curbs, ramps, and large masonry cracks

Recommended Applications:

• Small holes, surface pits, and hairline cracks in concrete floors
• Spalled concrete and pop-outs
• Broken steps, curbs, and ramps
• Concrete overlays and large masonry cracks
• Cracks in concrete slabs, driveways, and sidewalks

Cure Schedule (at 70°F):

• Pot Life: 1-4 minutes
• Tack Free: 10 minutes
• Light Foot Traffic: 10-20 minutes
• Recoat/Topcoat: 1 hour
• Full Cure: 1 hour

Physical Properties:

• Tensile Strength: 4,300 psi
• Hardness: 70
• Ultimate Elongation: 4-6%
• Viscosity: Less than 25 cps
• Adhesion: Excellent
• Abrasion Resistance: Excellent
• VOC: 6 grams per liter
• Mix Ratio: 1:1 by volume
• Standard Color: Gray
• Packaging: 2 Gallon Kit
• Shelf Life: 1 year in unopened containers

Limitations:

• Work one small area at a time
• Applying too thick may cause product failure
• All new concrete must be cured at least 30 days before application
• Substrate temperature must be 5°F above dew point
• Not UV stable

How to Use:

1. Mix 1 part Part A and 1 part Part B for 15 seconds
2. Add the desired amount of CP Decorative Texture Mix to thicken and remix
3. Immediately place the mixed material into the repair area using a trowel. Product has a very short pot life
4. Trowel smooth and remove any excess material